E 000 General Provisions
E 100 Introduction and General Information
- E 110 Manual References and Sources of Information
- E 120 Definitions
- E 130 Abbreviations
- E 140 Fundamentals of Real Property for Street Design Purposes
- E 150 Legal Liability and Maintenance Responsibility
E 200 General Design of Street Improvement Projects
- E 210 Street Classifications
- E 220 Financing
- E 230 Street Improvement Policies
- E 240 Calculations and Problem Solutions
E 300 Roadway Design Controls and Criteria
- E 310 Traffic Data
- E 320 Design Vehicle Physical Characteristics and Minimum Clearances
- E 330 Speed
- E 340 Highway (Street) Capacity
- E 350 Drainage Controls and Criteria
- E 360 Other Elements Affecting Geometric Design
- E 370 Terrain and Land Development
- E 380 Intersection Grades Controlled by Street Classification
E 400 General Roadway Design Elements
- E 410 Horizontal Alignment
- E 420 Vertical Alignment
- E 430 Combination of Horizontal and Vertical Alignment
- E 440 Sight Distance
E 500 Design Criteria For Special Street Components and Projects
- E 510 Alleys
- E 520 Cul-de-Sacs and Elbow Curves
- E 530 Driveways
- E 540 Grade Separations
- E 550 Intersections At-Grade
- E 580 Private Streets
- E 590 Access Ramps (formerly E 532)
E 600 Cross-Section Elements
- E 610 Streets
- E 620 Pavements
- E 630 Curbs and Gutters
- E 640 Concrete Gutters
- E 650 Borders
- E 660 Medians
- E 670 Retaining Walls and Bulkheads
- E 680 Side Slopes
- E 690 Traffic Guides and Barrier Installations
E 700 New Project Construction
- E 710 Construction Control
- E 720 Bid Document
- E 730 Changes In Documents
- E 740 Final Inspection

E 550 Intersections At-Grade

Most of the basic concepts presented in this Part of the Manual on highway and intersection traffic capacities, types of intersections, and their modification by realignment and channelization have been taken from other publications. Although these concepts have not been changed, recent editions of these sources of information have revised some of the terms and definitions, slightly altered or added new highway and intersection capacity charts and tables and refined the previous procedures by incorporating a new degree of flexibility for local applications. Therefore, for a more recent, comprehensive, and detailed analysis, reference is made to the following publications:

A Policy on Geometric Design of Rural Highways, 1965 Edition.¹
Capacity Analysis Techniques for Design of Signalized Intersections, 1967 Edition.¹
Highway Capacity Manual, 1965 Edition.¹
Channelization, The Design of Highway Intersections at Grade, 1962 Edition.¹

Footnote

This content is obsolete. Team is conducting research to identify the current equivalent reference or information.